When your Whirlpool washer displays the “LOC” code, it indicates that the washer’s child lock feature is activated. This safety feature is intended to prevent young children from opening the washer door and risking injury. To disable the child lock feature, simply press and hold the “Start/Pause” button for three seconds.
If your Whirlpool washer shows the “LOC” error code, it means that the child lock feature is active. This feature is designed to keep small children from operating the washer. To deactivate the child lock, press and hold the “Start/Pause” button for three seconds.
Once you do this, the “LOC” error code will be cleared, and you can resume using your washer normally.
How to Troubleshoot and Fix ‘LOC’ Error on Whirlpool Washer
If your Whirlpool washing machine is experiencing drainage issues, it’s recommended to clean the drain pump filter. Start by unplugging the machine and removing the lower panel. Locate the drain pump filter and thoroughly clean it.
Additionally, consider cleaning the drain hose. Disconnect it from the washing machine and clear any obstructions. If the problem persists, it might be necessary to replace the drain pump for optimal drainage.
Whirlpool Washer Stuck on Lock – Causes and Solutions
If your Whirlpool washer is stuck in the lock position, here are some troubleshooting steps to resolve the issue. First, ensure that the washer is properly connected to an electrical outlet and check for any loose power cord connections.
If the power cord is secure, unplug the washer and inspect the internal wiring for any loose connections. Tighten any loose wires if found. Next, examine the door lock for any signs of damage or debris. If damaged, replace the door lock.
Alternatively, if the door lock appears intact and clean, test the door lock switch using a multimeter after unplugging the washer and removing the door. Replace the door lock switch if it’s found to be defective.
If the door lock switch is functioning properly, the problem might lie with the main control board. Unplug the washer, remove the back panel, and test the main control board using a multimeter to determine if it’s faulty.
Locating the Control LOC Key on a Whirlpool Washer
The control lock key on a Whirlpool washer can be found on the control panel, typically located to the left of the power button. To lock the control panel, press and hold the control lock key for 3 seconds. Conversely, to unlock the control panel, press and hold the control lock key for 3 seconds.
What Does the LOC Error Mean in a Whirlpool Washer
If you encounter a LOC error while attempting to install a game or app on your Xbox One, it indicates an issue with the storage location. The error message will specify the problematic storage device. Here are some steps to troubleshoot a LOC error:
- Start by restarting your Xbox One and retrying the installation of the game or app.
- If the issue persists, uninstall the game or app and then reinstall it.
- If the error continues, it is possible that the storage device itself is causing the problem. Format the storage device and attempt the installation again.
- If you still face difficulties, there may be an issue with the game or app. Contact the developer for assistance in resolving the problem.
Understanding the Red Lock Symbol on Your Whirlpool Washing Machine
If a red lock symbol appears on your Whirlpool washing machine, it indicates that the washer is in Child Lock mode. This feature is specifically implemented to prevent young children from starting the washer accidentally. To disable the Child Lock, press and hold the start/pause button for a duration of three seconds.
Troubleshooting the LOC Error on Your Whirlpool Dryer
If your Whirlpool dryer is showing the error code “LOC,” there are troubleshooting steps you can take. Start by verifying that the dryer is securely plugged into an outlet. If it is plugged in but not functioning, try resetting the circuit breaker by turning it off and then on again. If the error code continues to appear, it may be necessary to replace the control panel for further resolution.
Troubleshooting a Locked Whirlpool Washer That Won’t Turn On
If your Whirlpool washer fails to power on, follow these troubleshooting steps. Firstly, ensure the washer is properly plugged into a functioning outlet. Next, check the door to ensure it is closed tightly and that there is no water remaining inside.
If the door is open or water is present, these factors may be preventing the washer from turning on. If neither of these is the cause, it is likely that the washer’s lid switch is faulty and requires replacement.
Last Line
The “LOC” error code on a Whirlpool washing machine indicates that the washer’s lid is open. The washer is designed not to operate when the lid is open for safety reasons. To resolve the issue, simply close the lid securely and the error code should clear, allowing the washer to operate normally.
