How to Replace Bathroom Faucet | Tips & Tricks to Considered
Bathroom Faucets

How to Replace Bathroom Faucet | Tips & Tricks to Considered

Aug 15, 2022

If you have an old and dull bathroom and want to give it a style and new design, then there are many things you can do. For example, replacing the bathroom faucets is also a good idea because it gives a new look to your bathroom.  

Replacing the old and outdated faucet in your bathroom is one of the best ways to improve the bathroom’s overall aesthetic. Not only does it make a room feel cleaner, but it can also be a great way to add some style.

The most critical decision when replacing your faucet is whether or not you want an original look or a more modern one. If you have an old-fashioned or traditional design in your bathroom, you may want to stay with an authentic, classic look of gold, brass, nickel, or chrome.

But if you have a more modern design with sleek lines and curves for everything from tile to shower curtains and furniture, then you may want to go for something like steel or black nickel.

Replacing the  bathroom faucets
Replacing the bathroom faucets

A step-by-step guide to replacing the bathroom faucets

Faucet replacement can be a straightforward task for many homeowners. However, it does require some expertise and can be pretty tricky for an inexperienced person. You should not take this job lightly because faucet installation is a serious plumbing job that requires knowledge of which tools to use and how to fix leaks.

A bathroom faucet typically consists of three main parts: the valve, the handle assembly, and the spout. The valve is mounted on the wall above or below your sink basin; it controls water flow by opening and closing an inlet from a cold water pipeline or hot water pipeline. The handle assembly connects directly to the valve stem, connecting to the spout to control water flow.

A new faucet will come with all these components already assembled. In addition to this, this will provide a more streamlined installation process and reduce confusion amongst other users who are not as familiar with such devices.

1. Clean the pipes and prepare the area for bathroom faucet installation

The pipes and the surrounding areas of the bathtub need to be thoroughly cleaned with soap scum, rust, and any other obstructions before a new faucet can be installed.
Pipes that are not cleaned out can hinder water flow, create clogs in lines, and cause foul odors.
The pipe should also be free from any obstructions that may prevent the faucet from screwing onto it tightly.

2. Turn off water supply and drain the pipes from your pipes

Sometimes we need to replace the bathroom faucets just because of the blockage. One of the most common causes of sewer line blockage is tree roots. It will be challenging to identify this as the cause of the obstruction. But if you recently had tree root surgery or have a persistent problem with tree roots in your yard, it is time to check your pipes.
In some cases, you can take quick action to stop sewer line backup before it starts by taking these precautions:
First, turn off the water supply and drain the pipes from your pipes.
Turn off the water supply at the main valve or turn-off valve outside of your house. Ensure that everyone who lives in the home has left so that no one turns on a faucet or flushes a toilet while draining the pipes. This process could take up to 30 minutes, depending on how long the drain is.

3. Remove old faucets by unscrewing them

The faucet has two parts: the spout and the base. Usually, it screws onto the ground from below.
First, use a wrench to loosen the nut that is holding the faucet in place. Then, use pliers to turn the spout counterclockwise until it comes loose from its seat.

If you are having trouble getting it open, make sure you have enough leverage by using a wrench or channel locks to help loosen it up. Next, remove screws from underneath the base by unscrewing them one at a time. When all of them are removed, pull off the entire faucet from your sink and replace it with a new one!

4. Use a cloth or rag to prevent scratching of the porcelain sink surface.

Cloth or rag is consider to be the best way of maintaining a porcelain sink. This is because it doesn’t leave any scratches, and it helps remove the dirt without scrubbing.
The surface of a porcelain sink is delicate and needs to maintain with care. It gets scratches by an abrasive cleaner when soap scum and grime can remove from the surface.
A cloth or rag consider the best way of maintaining a porcelain sink because it doesn’t leave any scratches, and it helps remove dirt without scrubbing.

5. Wrap pipes with Teflon tape before installing the new faucet

Teflon tape is a simple but important measure that can use to help prevent any leakage.
Teflon tape is a type of plumbing tape that has a use to seal off parts of pipes. This significant but straightforward measure can prevent any leakage and ensure that the lines are not in danger of damage.

6. Use lubricant such as WD-40 

Use lubricant such as WD-40 on any moving parts that are difficult to move. WD-40 is a type of lubricant that is typically used on mechanical components. It can be sprayed or dripped onto any moving part to make it move more freely again. WD-40 contains a solvent and oil.

The solvent helps to dissolve the metal oxides that have built up on the moving parts. And the oil allows for smoother sliding or movement of the metal.
Some people use WD-40 as a general lubricant for other things, too, like squeaky hinges and squeaky doors in their homes. But this does not work as well as with mechanical pieces because WD-40 is not intended to last long periods.

Hold the wrench tightly and turn counterclockwise while pulling back on the pipe.

7. Fixing the New Bathroom Faucet

Now finally, fixing the new faucets. Selecting a new faucet by screwing it into both sides of your sink, making sure that there’s enough space between the edge of your sink and your soap dispenser so that people can still use them without hitting them on the side of their face while standing in front of the sink.

Easy Tips on Installation Bathroom Fixtures

The difference between a functional and aesthetically pleasing bathroom is mainly due to the design and installation of the fixtures. The following tips will help you install your new fixtures with ease.

  • Always turn off the water supply before installing or removing any fixture.
  • Use a layer of silicone to seal any gaps between the fixture and the wall. Fixtures should be sealed to avoid water leaks.
  • Pay careful attention while drilling holes for pipes as improper drilling could cause extensive damage to your walls or ceilings, not to mention setting off an awful stink that will drive you crazy!

Conclusion

We provide a deep guide on how to replace a bathroom faucet. Replacing the bathroom faucets might be difficult for some one who is doing this job for the first time. But if he can change faucets twice and thrice, the person will learn replacing is somehow very straightforward process. Moreover, if you want to learn more about faucets then click here.

Leave a Reply

Your email address will not be published. Required fields are marked *